The S2-CSE dual stereo line channel with EQ has two balanced stereo inputs on Neutrik XLR connectors and is fitted with equalisation, providing 10dB cut and boost at HF (6.5kHz) and LF (100Hz). The EQ button places the equalisation in and out of the signal path. The button is illuminated in yellow when the EQ is active. The INP 1/INP 2 button selects which input is routed through the channel. The button is illuminated in red to indicate when Input 2 is selected. The operation of the button is inhibited when the channel is “live”. There are separate logic remote output controls for both of the two inputs providing start/stop functions by fader, or ON button. Remotes, etc, are triggered when the fader is up and the channel ON button shows green. The start function can be configured to be either momentary (500mS) or latched for each input. The remote outputs on the 9 way D-type plug are fed from NPN opto-isolators.
Product Features
Two stereo line switchable inputs.
EQ fitted as standard
Separate remote output controls for both inputs providing start/stop functions by fader, or ON button.
Start function can be configured to as momentary (500mS) or latched for each input.
Continuous momentary start can be enabled.
Remotes can be configured as inputs, outputs, latching, or momentary & active high or low.
Control of two separate timer displays.
PAN/BAL control.
100mm VCA fader.
Gold plated Neutrik XLR connectors .
Typical Applications
Community, student, hospital and small scale radio broadcast mixer, secondary or backup on-air mixer.
Product Category
Mix Consoles
Technical Specifications
Input/Output Impedances
Mic Input: > 1k5Ω electronically balanced
Mono Line Input: > 20kΩ electronically balanced
Stereo Line Input: > 20kΩ electronically balanced
PGM & AUD Output: < 75Ω electronically balanced
Mono Output: < 75Ω electronically balanced
Monitor Outputs: < 75Ω unbalanced
AES Input/Output: 110Ω
S/PDIF Input/Output: 75Ω
BNC Wordclock input: 50Ω
Input/Output Gain Range
Mic Input: Preset pot +13dB to +66dB ref -50dBu, TRIM pot ±12dB
Mono Line Input: Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB
Stereo Line Input: Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB
Telco Input: Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB
Telco Output: Preset pot -6dB to +4dB ref 0dBu
Mix Minus Input: Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB
Mix Minus Output: Preset pot -3dB to +3dB ref 0dBu
Digital Input: 0dBFS = +12dBu on input; TRIM pot ±12dB allowing 0dBu to +24dBu
Digital Output: 0dBFS = +18dBu
Frequency Response
Mic Input: 40Hz to 20kHz, -1dB,+0dB (-3dB at 130Hz with HPF in)
Line Inputs: 20Hz to 20kHz, - 0.5dB,+0dB
RIAA Input: 30Hz to 16kHz ±1.5dB RIAA equalised
Noise (20Hz to 20kHz)
Mic Input E.I.N.: -129dB with 150Ω source
Stereo Inputs (fader down, no routing): -89dB ref 0dB
Stereo Inputs (fader down, one channel routed): -89dB
Stereo Inputs (unity gain, no routing): -89dB
Stereo Inputs (unity gain, one channel routed): -86dB
Stereo Inputs (unity gain, two channels routed): -83dB
