The studio monitor channel is optional and is used for the monitoring of various sources on the studio loudspeakers (MONITOR) on a 6.35mm stereo jack socket and studio headphones (PHONES) on a 6.35mm stereo jack socket. A front panel control is used to vary the monitor level. The studio monitor loudspeaker level can be variable between 0 (cut off) and 10 (max). The output will need to be fed to a suitable power amplifier to drive the loudspeakers. Headphones with impedances of 35 ohms and above can be driven directly from the channel headphone connector on the rear panel.
Product Features
Selectable PGM, AUD, EXT 1 and EXT 2 Sources.
Source selection indicator lights.
MONITOR and PHONES outputs on rear panel.
MUTE LED indicator.
MUTE remote outputs for 'Mic Live' lights.
AUTO CUE / PFL buttons for each output.
Studio T/B button with replace/dim jumper options.
Configurable Global Talkback.
Talkback input and output routing.
Typical Applications
Community, student, hospital and small scale radio broadcast mixer, secondary or backup on-air mixer.
Product Category
Mix Consoles
Technical Specifications
Input/Output Impedances
Mic Input: > 1k5Ω electronically balanced
Mono Line Input: > 20kΩ electronically balanced
Stereo Line Input: > 20kΩ electronically balanced
PGM & AUD Output: < 75Ω electronically balanced
Mono Output: < 75Ω electronically balanced
Monitor Outputs: < 75Ω unbalanced
AES Input/Output: 110Ω
S/PDIF Input/Output: 75Ω
BNC Wordclock input: 50Ω
Input/Output Gain Range
Mic Input: Preset pot +13dB to +66dB ref -50dBu, TRIM pot ±12dB
Mono Line Input: Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB
Stereo Line Input: Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB
Telco Input: Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB
Telco Output: Preset pot -6dB to +4dB ref 0dBu
Mix Minus Input: Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB
Mix Minus Output: Preset pot -3dB to +3dB ref 0dBu
Digital Input: 0dBFS = +12dBu on input; TRIM pot ±12dB allowing 0dBu to +24dBu
Digital Output: 0dBFS = +18dBu
Frequency Response
Mic Input: 40Hz to 20kHz, -1dB,+0dB (-3dB at 130Hz with HPF in)
Line Inputs: 20Hz to 20kHz, - 0.5dB,+0dB
RIAA Input: 30Hz to 16kHz ±1.5dB RIAA equalised
Noise (20Hz to 20kHz)
Mic Input E.I.N.: -129dB with 150Ω source
Stereo Inputs (fader down, no routing): -89dB ref 0dB
Stereo Inputs (fader down, one channel routed): -89dB
Stereo Inputs (unity gain, no routing): -89dB
Stereo Inputs (unity gain, one channel routed): -86dB
Stereo Inputs (unity gain, two channels routed): -83dB
