The mic/mic input channel is a dual mono microphone input with a button switch to select either Mic 1 or Mic 2. Each Mic input has jumper settable phantom power available at +48V and a high pass filter to remove low frequency rumbles. When enabled, the LF response of the microphone is rolled off at 125kHz, 6dB per octave. If the Mic input is used for the presenter’s mic it can also become the talkback mic. Equalisation is fitted as standard on this channel and is enabled by the EQ button, providing 10dB cut and boost at HF (6.5kHz) and LF (100Hz). The BAL/PAN control operates as follows : Full anti-clockwise pans the signal to the left and increases the signal by 3dB (right channel reduces by 70dB); full clockwise pans the signal to the right and increases the signal by 3dB (left channel reduces by 70dB).
Product Features
Dual mic inputs.
Individual +48V phantom power for each input.
Individual high pass filter for each input.
Can be configured as talkback mic.
EQ as standard.
Balanced line insert send and return available.
PAN/BAL control.
Logic remote input controls for Mic Cough muting & Reverse Talkback.
2 separate output controls for Mic Cue lights.
Control Room speaker or Studio speaker muting outputs.
Control of two separate timer displays.
Gold plated Neutrik XLR connectors .
Typical Applications
Community, student, hospital and small scale radio broadcast mixer, secondary or backup on-air mixer.
Product Category
Mix Consoles
Technical Specifications
Input/Output Impedances
Mic Input: > 1k5Ω electronically balanced
Mono Line Input: > 20kΩ electronically balanced
Stereo Line Input: > 20kΩ electronically balanced
PGM & AUD Output: < 75Ω electronically balanced
Mono Output: < 75Ω electronically balanced
Monitor Outputs: < 75Ω unbalanced
AES Input/Output: 110Ω
S/PDIF Input/Output: 75Ω
BNC Wordclock input: 50Ω
Input/Output Gain Range
Mic Input: Preset pot +13dB to +66dB ref -50dBu, TRIM pot ±12dB
Mono Line Input: Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB
Stereo Line Input: Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB
Telco Input: Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB
Telco Output: Preset pot -6dB to +4dB ref 0dBu
Mix Minus Input: Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB
Mix Minus Output: Preset pot -3dB to +3dB ref 0dBu
Digital Input: 0dBFS = +12dBu on input; TRIM pot ±12dB allowing 0dBu to +24dBu
Digital Output: 0dBFS = +18dBu
Frequency Response
Mic Input: 40Hz to 20kHz, -1dB,+0dB (-3dB at 130Hz with HPF in)
Line Inputs: 20Hz to 20kHz, - 0.5dB,+0dB
RIAA Input: 30Hz to 16kHz ±1.5dB RIAA equalised
Noise (20Hz to 20kHz)
Mic Input E.I.N.: -129dB with 150Ω source
Stereo Inputs (fader down, no routing): -89dB ref 0dB
Stereo Inputs (fader down, one channel routed): -89dB
Stereo Inputs (unity gain, no routing): -89dB
Stereo Inputs (unity gain, one channel routed): -86dB
Stereo Inputs (unity gain, two channels routed): -83dB
