{"product_id":"glensound-beatrice-r16-5f-16-channel-network-audio-rackmount-intercom","title":"Glensound Beatrice R16\/5F | 16 Channel Network Audio Rackmount Intercom","description":"\u003cp\u003e16 Channel 1RU No call facility. 5 Pin Female XLR 16 Channel Network Audio Rackmount Intercom\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e16 Channels Of Intercom One single user connected to the unit can listen to and communicate with 16 separate locations on the network. Depending upon how the Dante network has been routed, the incoming audio circuits and outgoing circuits can be different locations.\u003c\/li\u003e\n\u003cli\u003eConfigurable Speak Switches Each channel's speak switch can be user defined to operate to your preference. The options are: Momentary, Latching or Intelligent Lever Key.\u003c\/li\u003e\n\u003cli\u003eDante® Routing \u0026amp; Partyline Audio routing to\/ from other devices is setup using Dante controller which allows for point to multipoint routing on outgoing circuits (but only 1 single incoming circuit for each of the 16 channels). Therefore we’ve included an inbuilt fixed ratio 11 input 11 output mixer matrix with inputs and outputs connected directly to the Dante \/ AES67 network which allows for setting up partyline and group circuits.\u003c\/li\u003e\n\u003cli\u003eOnboard Mic \u0026amp; External Mic Input A good quality, clear sounding microphone amplifier, designed for communication purposes, is fitted which also has the benefit of a compressor\/ limiter circuit to help keep levels and intelligibility consistent even when the operator gets overly excited. This microphone amp has two microphone sources, either the inbuilt front panel mounted electret capsule which provides good voice intelligibility from normal working distances, or a balanced XLR input for connecting external gooseneck microphones. Twelve Volt Phantom power is also available and can be turned on\/ off as required via an internal link.\u003c\/li\u003e\n\u003cli\u003eHigh Output Intelligible Loudspeaker What’s the point of an intercom unit if the onboard speaker is so cheap that you can’t understand what is being said to you? We tried hundreds of different drive units before settling on the one used in the Beatrice R16. We chose it because it had a much cleaner sound and better frequency response for vocals than any other speaker on the market that would fit in a 1RU subrack.\u003c\/li\u003e\n\u003cli\u003eMains or PoE Powered An inbuilt wide range switch mode mains power supply is fitted for powering the Beatrice R16. It is terminated with a standard IEC plug, making it easy to plug in wherever you are in the World. The unit can also be powered via the Ethernet cable by standard PoE (Power over Ethernet) on either of the copper Ethernet ports. The PoE power can be supplied by an external PoE switch or a midspan power injector.\u003c\/li\u003e\n\u003cli\u003eRedundant Twin Copper \u0026amp; Twin Fibre Ethernet Interface When ultra reliable communications is needed for the utmost important jobs, glitch free redundant network circuits can be set up using the primary and secondary Dante network ports. There are 2 copper Ethernet ports on RJ45s and also 2 fibre Ethernet ports presented as SFP slots (SFP modules not included). Redundant networks can be set up across any of these ports. These ports can also be set up as a network switch.\u003c\/li\u003e\n\u003cli\u003eGPIO A solid state relay output is provided and is triggered when any speak key is on (useful for dimming external loudspeakers or red light controls). In total there are 12 loop closure inputs. 10 of these control the first 8 talk keys and talk to group and talk to all. The other 2 loop closure inputs provide internal \u0026amp; external LS cuts.\u003c\/li\u003e\n\u003cli\u003eIFB\/ AUX Sources Four different IFB\/ Aux audio sources are received from the Dante network. Each of the four sources is associated with four outgoing talkback channels. If audio is routed to the(se) IFB\/ Aux sources in the network then they are mixed in with their associated outgoing talkback channel circuit. If a talkback key is on then the associated IFB\/ Aux source is ducked by a user definable amount. If the talkback is not on then the IFB\/ Aux source is routed to the channels' output with unity gain. IFB\/ Aux sources are very useful for distributing programme audio around an intercom setup whilst the ducking facility allows talkback to be heard over it.\u003c\/li\u003e\n\u003cli\u003eMicrophone Level Meter An eight LED front panel multipurpose indicator is used to indicate the outgoing microphone level.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"tab-content\" id=\"tab2content\"\u003e\n\u003cp\u003e\u003ciframe frameborder=\"0\" height=\"393\" src=\"https:\/\/www.youtube.com\/embed\/cRMq68ysOFU?si=34OoPpluVhZ50IBa\" width=\"700\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eThe Glensound BEATRICE R16 is a versatile and fully featured 16 channel rackmount intercom with crystal clear audio designed for broadcast, theatre and professional audio applications.\u003c\/p\u003e\n\u003cp\u003eIt is part of our Beatrice intercom system that utilises the reliable and proven Dante network audio transmission protocol to allow real time distribution of uncompressed audio across standard networks.  It is also AES67 compliant. As such the BEATRICE R16 is fully compatible with other manufacturers’ equipment using the Dante and\/ or AES67 protocols.\u003c\/p\u003e\n\u003cp\u003eThis 1RU rackmount intercom was designed to be very easy to use for the operator and simple to set up for the technician. It includes all the basic functionality required for small intercom systems and none of the overly complex installation requirements normally associated with large systems.\u003c\/p\u003e\n\u003cp\u003eAlso Available in AES67\/Ravenna version. \u003c\/p\u003e \u003c\/div\u003e\u003ch4\u003eTechnical Information\u003c\/h4\u003e\u003cdiv class=\"tab-content\" id=\"tab5content\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications for both Dante and Ravenna verisons. Scroll down for details.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Gain Range:\u003c\/strong\u003e +61 to +21dB \u003cbr\u003e\u003cstrong\u003ePhantom Power:\u003c\/strong\u003e 12 Volts (set by internal link)\u003cbr\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e: -126dB (20Hz to 20kHz A weighted 150 Ohms)\u003cbr\u003e\u003cstrong\u003eHeadphone Impedance:\u003c\/strong\u003e 32 - 1000 Ohms\u003cbr\u003e\u003cstrong\u003eMax Headphone Output Level\u003c\/strong\u003e: +14dB into 600 Ohms \u003cbr\u003e\u003cstrong\u003eHeadphone Connector\u003c\/strong\u003e: 6.35mm (1\/4\") TRS socket\u003cbr\u003e\u003cstrong\u003eBand Pass Filter:\u003c\/strong\u003e 50Hz to 15kHz\u003cbr\u003e\u003cstrong\u003eIFB\/ AUX Ducking Level\u003c\/strong\u003e: 0 to -63dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMains Voltage:\u003c\/strong\u003e 100 to 240 VAC +\/-10%\u003cbr\u003e\u003cstrong\u003eMains Frequency\u003c\/strong\u003e: 50 to 60Hz\u003cbr\u003e\u003cstrong\u003ePower Over Ethernet (PoE)\u003c\/strong\u003e: Complies to IEEE 802.3af-2003, Class 0, PoE on either copper port\u003cbr\u003e\u003cstrong\u003eConsumption:\u003c\/strong\u003e \u003cstrong\u003eRedundancy:\u003c\/strong\u003e Mains and PoE are dioded together for glitch free redundancy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMechanics\u003c\/strong\u003e: All aluminium with laser etched anodised panels and light textured black powder coated sides, base and lid\u003cbr\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 19\" 1RU high 164mm deep\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6Kg (3.5lb)\u003cbr\u003e\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 3Kg\u003cbr\u003e\u003cstrong\u003eShipping Size:\u003c\/strong\u003e 61 x 41 x 12cms\u003cbr\u003e\u003cstrong\u003eShipping Carton\u003c\/strong\u003e: Rugged export quality cardboard carton\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGPIO\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGPO:\u003c\/strong\u003e Solid State Relays wired Normally Open \u0026amp; Normally Closed\u003cbr\u003e\u003cstrong\u003eGPI:\u003c\/strong\u003e Logic level pull down to ground to operate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e: 0 to +50°C (32 to 122°F)\u003cbr\u003e\u003cstrong\u003eStorage Temperature\u003c\/strong\u003e: -20 to +70°C (-4 to 158°F)\u003cbr\u003e\u003cstrong\u003eRelative Humidity:\u003c\/strong\u003e 0 to 95% non-condensing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIC\/ HEADSET OPTION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard (Part no: Beatrice R16)\u003c\/strong\u003e: Front panel 3 pin XLR socket mic input\u003cbr\u003e\u003cstrong\u003eOptional 5 Pin (Part no: Beatrice R16-X5):\u003c\/strong\u003e Front panel 5 pin XLR socket headset connector\u003cbr\u003e\u003cstrong\u003eOptional 4 Pin (Part no: Beatrice R16-X4):\u003c\/strong\u003e Front panel 4 pin XLR plug headset connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHandbook\u003c\/strong\u003e: By download \u003cbr\u003e\u003cstrong\u003eNetwork Cable:\u003c\/strong\u003e 2 meter RJ45 to RJ45 cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK OPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDANTE\/AES67 VERSION\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePhysical:\u003c\/strong\u003e 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\u003cstrong\u003eSample Frequency:\u003c\/strong\u003e 48K\u003cbr\u003e\u003cstrong\u003eResolution:\u003c\/strong\u003e 24 Bit\u003cbr\u003e\u003cstrong\u003eControl \u0026amp; Routing:\u003c\/strong\u003e Via Free Dante Controller\u003cbr\u003e\u003cstrong\u003eAES67:\u003c\/strong\u003e Can be configured for AES67\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRAVENNA\/AES67 VERSION\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePhysical:\u003c\/strong\u003e 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\u003cstrong\u003eAES67:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eHigh Sample Rates:\u003c\/strong\u003e 44.1kHz - 192kHz\u003cbr\u003e\u003cstrong\u003ePTPv2:\u003c\/strong\u003e Master or Slave, IEEE-1588-2008 standard\u003cbr\u003e\u003cstrong\u003eSMPTE ST 2110-30:\u003c\/strong\u003e Yes. Including level C and CX\u003cbr\u003e\u003cstrong\u003eSMPTE ST2022-7:\u003c\/strong\u003e Yes. Seamless data switching\u003cbr\u003e\u003cstrong\u003eNMOS IS-04 (Disovery):\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eNMOS IS-05 Routing):\u003c\/strong\u003e Yes\u003c\/p\u003e \u003c\/div\u003e\u003ch4\u003eOptions\u003c\/h4\u003e\u003cdiv class=\"tab-content\" id=\"tab3content\"\u003e\n\u003cp\u003eAs standard the Beatrice R16 is supplied with a 3 pin XLR socket for the microphone input and a 6.35mm (1\/4\") stereo jack socket for the headphone output.\u003c\/p\u003e\n\u003cp\u003eIt can however be ordered with either a 4 pin or 5 pin XLR headset interface instead.\u003c\/p\u003e\n\u003cp\u003eIf ordered with a headset connector then a toggle switch will be added next to the headset connector. This toggle switch will turn the loudspeaker on\/ off (ie. it will have the same effect as plugging a headphone jack into the headphone socket on the standard version).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart numbers are:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBeatrice R16\/4M (4 Pin Male XLR)\u003c\/p\u003e\n\u003cp\u003eBeatrice R16\/5F (5 Pin Female XLR)\u003c\/p\u003e\n\u003cp\u003eWiring for the headset interfaces are to common standards as detailed below.  It may be possible to provide other custom wiring configurations if required, please email sales@glensound.com with your requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBeatrice R16\/5F Wiring Info\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eConnector type: 5 Pin XLR Socket (female XLR fitted, suitable for mating with cable mounted male)\u003c\/p\u003e\n\u003cp\u003ePIN 1: Mic -\u003cbr\u003ePIN 2: Mic +\u003cbr\u003ePIN 3: GND\u003cbr\u003ePIN 4: Headphone Left\u003cbr\u003ePIN 5: Headphone Right\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBeatrice R16\/4M Wiring Info\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eConnector type: 4 Pin XLR Plug (male XLR fitted, suitable for mating with cable mounted female)\u003c\/p\u003e\n\u003cp\u003ePIN 1: Mic - (Mic GND)\u003cbr\u003ePIN 2: Mic +\u003cbr\u003ePIN 3: Headphone GND\u003cbr\u003ePIN 4: Headphone +\u003c\/p\u003e \u003c\/div\u003e\u003ch4\u003eOfficial Resources\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.glensound.co.uk\/product-details\/beatrice-r16\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOfficial Product Page\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.glensound.co.uk\/assets\/library\/5e81f897894fc-Beatrice%20Entire%20Range%20Low.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBeatrice Entire Range Brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.glensound.co.uk\/assets\/library\/602a488f5225b-Beatrice%20R16%20v3.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBeatrice R16 Brochure v3\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.glensound.co.uk\/assets\/library\/656a0f8924789-Beatrice%20R16%20Manual%20v3.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBeatrice R16 Manual v3.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.glensound.co.uk\/assets\/library\/5ddff2e74d5e7-Dante%20bandwidth.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDante bandwidth\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.glensound.co.uk\/assets\/library\/5ecd258232c29-Glensound%20AES67%20Dante%20guide.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGlensound AES67 Dante guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.glensound.co.uk\/assets\/library\/5773b2568aca0-Glensound%20Catalogue%2019%20LQ.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOfficial Glensound Catalogue PDF\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":53671397130581,"sku":"Beatrice R16\/5F","price":2240.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1033\/6993\/3141\/files\/Glensound_Glensound_Beatrice_R16_5F_16_Channel_Network_Audio_Rackmount_Intercom_01.jpg?v=1776027840","url":"https:\/\/tvpro.lt\/products\/glensound-beatrice-r16-5f-16-channel-network-audio-rackmount-intercom","provider":"tvpro.lt – Broadcast \u0026 Pro Video Equipment Online Store","version":"1.0","type":"link"}